50 ft Reel - Warm White Dimmable LED Rope Light - 120V 513 Diode

• Energy Efficient
• Plug & Play Installation
• ETL Listed / UV Protected
• Rated IP65: Dust-tight and protected against water spray from any angle.

ROPE LIGHT MUST BE FULLY UNCOILED BEFORE POWERING ON.
CONNECTING TO POWER WHILE ON THE SPOOL CAN CAUSE DAMAGE, FIRE, OR VOID THE WARRANTY.

• 

  All in One 50ft Reel Kit

  Get more value with this all-in-one 50ft LED rope light reel — ready to use right out of the box!
  Easily install in living areas, kitchens, hallways, or bedrooms using clips or channels to craft mood-enhancing linear lighting. From cozy ambience to modern elegance, complete your DIY setup effortlessly with this plug-and-play LED lighting kit.

• 

  Warm White LED Diodes

  With a warm color temperature of 2700K, this rope light creates a cozy, soft white glow — ideal for accent lighting, relaxing moods, or nighttime visibility.
  Use a dimmer to control brightness anywhere from 5% to 100%, giving you full flexibility. Whether it's a home office, bedroom, or lounge, you'll enjoy beautiful lighting that's also energy efficient and cost-saving.

• 

  Outdoor Rated & Splash Resistant

  Designed with UV protection and splash resistance, this rope light handles the outdoors with ease.
  From patios and pergolas to decks and driveways, rain or shine — your lighting stays secure. And because LED emits minimal heat, this rope light lasts longer without the risk of overheating, unlike older incandescent models.

This 50ft warm white LED rope light kit includes a 2ft 2-wire power cord, 2-wire connector, and a ½" end cap — pre-attached for quick plug-and-play installation. Designed with dimming compatibility and vibrant lighting, it's perfect for accenting any space — whether you're lighting up coves in kitchens, lining hallways, or adding ambiance behind beds or furniture. Cuttable every 30 inches, this rope light offers flexible customization while being UV-treated to prevent discoloration, making it a reliable choice for both indoor and outdoor projects.

Dimensions Diagram:

Specification Sheet Download

Dimensions Diagram:

 ➜ Does this rope light come with the an attached power cable ready to plug in?

AQ Lighting offers a free service which allows you to speak with a Licensed Electrician, who could direct you to the proper fixture for your specific application. Call 800-865-7221 ask for the Tech. Dept. They are all licensed professionals and AQ Lighting offers this NEW service absolutely free!

➜ Is this rope light a round tube or is it flat on the bottom?

While we carry both types at AQLighting, this rope light is round and emits light 360 degrees.

➜ Can you connect 2 rope lights together? Which connectors to use?

Yes you can connect 2 ropes together - easy splice kit SKU: RAIV-LED - this is the 1/2 " invisible splice connector

➜ Can I use a dimmer on a 70 foot continuous run? What dimmer do you recommend or sell?

Our DVCL-153P-WH dimmer would be compatible and it costs $39.99.

➜ What is the actual diameter of this rope light?

This rope light is 1/2" diameter but we also carry 3/8" rope light.

➜ Does this have a fuse?

Yes, this has a 5 amp buss fuse in the cord cap.

➜ What dimmer switch would works with this set?

Any CFL/LED compatible dimmer switch works best with this rope light. We typically recommend the Lutron DVCL-153P or the Legrand Wattstopper RHCL453PTC.

➜ This may be a silly question but when the connectors are added then at night you see a space that had no lighting. How do you eliminate this from happening

When 2 pieces of rope light are joined together with an invisible splice connector there is very little change in bulb spacing so there should be very little light fluctuation. In addition to the splice connector is a clear piece of heat shrink tubing. The tubing is installed over the splice and keeps the new joint weather proof. Because the tubing is clear it will also create very little light fluctuation. If you are using T, X or L connectors there may be a small dark spot which simply can not be avoided because the 1" bulb spacing may be interrupted.

➜ How many rope light strands can be linked together?

Using an eight amp rectifier you will be able to go up to a total of 450 feet

➜ Is this really a "do-it-yourself" job or will need to hire an electrician?

The kit has everything you need to install, making it ideal for DIY enthusiasts. As an added feature, AQLighting has licensed electricians on staff. It's an absolutely free service that we offer to our customers. Simply call us at (800) 865-7221 for more information!

➜ Can the connectors be purchased separately?

Yes, we have a full line of accessories that are sold separately. Please try AQ Lighting's technical department at 800-865-7221 for installation questions.

➜ Will this rope light fade in the sun after long exposure?

This rope light is UV protected which means it will take much longer to fade than the competition. After all, the sun is stronger than any man made protection!

➜ What is the recommended screw size for the 1/2" mounting clip?

The mounting clip is designed for a #6 screw. The hole dimension is just a fraction over 1/8".

➜ Can I use a dimmer with this product?

Most CFL and LED dimmer switch will be compatible with this rope light. We typically recommend the Lutron DVCL-153P or the Legrand Wattstopper RHCL453PTC.

➜ What is the LED spacing of this rope light?

This rope light has a 3/4" LED spacing

➜ Can this be cut for different lengths?

This rope light can safely be cut every 30 inches.

➜ How many plugs does it come with?

Our standard rope light roll comes with 1 factory attached power cord, as well as an end cap. We have additional power cords and accessories are sold separately here at AQLighting.

➜ Are these lights waterproof? I am planning to put them under my boat dock. They won't be submerged, but they will get wet for sure.

This rope light comes with an IP65 rating. The number "6" refers to it's protection against solids. In this case, the rope is considered "dust tight". The number "5" means it may get wet or even sprayed with light pressure, but should not be submerged.