Flexible LED tape and strip lights in 12V, 24V and 120V, from 8" kits to 150 ft reels.
LED tape light is a thin, flexible circuit strip of LEDs with adhesive backing that you cut to length and power from a driver or plug-in adapter. AQLightingGroup stocks 25 options: 12V and 24V tape for cabinets, coves and displays, 120V tape/rope hybrids that run up to 150 ft, IP67 neon flex and IP68 pool-rated strips, plus RGB and RGBW tape for holiday color.
LED tape light is a flexible circuit board, about 10 to 16 mm wide on the tapes here, lined with surface-mount LEDs such as SMD2835 or SMD5050 chips. An adhesive back lets it sit under cabinets, along coves, inside shelves or in an aluminum channel, and it bends around corners where rigid fixtures can't go.
Most tape runs on low voltage: 12V for short runs, 24V for longer ones, powered by a driver or transformer. AQL also carries 120V tape/rope hybrids that plug into line voltage and run up to 150 ft. You cut tape only at the marked cut points, then join pieces with tape light connectors.
The 25 products on this page fall into three groups. Pick the group first, then the voltage, color and IP rating.
Trulux 24V tapes for designers and contractors: 90+ CRI, cULus listed spec-grade models, up to 510 lumens per foot, with static white, tunable white (2700K–6000K) and RGBTW versions.
Everything for a first install: the 8" Plug & Light kit, 16 ft RGB kits and the 32 ft under-cabinet kit for kitchens, closets and toe kicks.
For long runs and wet spots: 120V Hybrid 2 and Hybrid 3 tape/rope sold by the foot, the 150 ft outdoor-rated reel, and IP67 NeonFlex Pro-V in single color or RGBW.
The IP rating tells you where a tape can go. Match it to the wettest condition the run will see, and keep drivers and controllers in a dry, ventilated spot.
Indoor, dry areas: the DIY 12V high output warm white kit for cabinets, shelves and closets.
Dust and splash resistant: Trulux static, tunable and RGBTW tapes for coves, displays and covered areas.
Sealed against water: NeonFlex Pro-V top-bend strips in single color or RGBW for signs, outlines and exterior details.
Pool rated: 15 mm neon underwater strips in RGB, static white or static color for pools and fountains.
NeonFlex Pro-V gives the smooth, dot-free line of glass neon in a 24V, IP67 silicone strip. It is custom cut and bends from the top for signs, logos and architectural outlines.
Shop NeonFlex Pro-V
Pool-rated 15 mm neon strips carry an IP68 rating for full submersion. Choose RGB, static white or static color for pool edges, spas and fountains, and pair them with AQL's underwater kits.
Shop underwater kits
LED tape makes clean, low-profile holiday lighting. RGB and RGBW tape can show red, green, warm white or any mix with a color controller, so one install covers Christmas, game days and every season after.
Use 12V for runs under about 16 ft, 24V for longer runs, and 120V hybrid for long outdoor lines without a driver.
Static white for task light, tunable white (2700K–6000K) for changing scenes, RGB or RGBW for color and holidays.
Check lumens per foot: 255 lm/ft suits accent and coves, 385–510 lm/ft suits task and commercial lighting.
Watts per foot × length, plus about 20% headroom, gives the driver size. Use separate feeds past the max run.
| Type | Voltage | Rating | Color options | Best for |
|---|---|---|---|---|
| Trulux spec-grade tape | 24V | IP54 (3 models), cULus (spec-grade) | Static, tunable, RGBTW | Commercial coves, retail, hospitality |
| AQL SMD2835 tape | 12V / 24V | IP67 waterproof | Warm white, cool white | Long counters, covered outdoor runs |
| Under-cabinet kits | 12V / plug-in | Indoor | Warm white, RGB, RGBW | Kitchens, closets, toe kicks |
| Hybrid tape/rope | 120V | 150 ft kit outdoor rated | Warm, cool, RGB | Rooflines, long runs, holiday outlines |
| NeonFlex Pro-V | 24V | IP67 | Single color, RGBW | Signs, outlines, exterior details |
| Pool neon strips | 24V | IP68 | RGB, white, color | Pools, spas, fountains |
Under-cabinet task light and toe kicks.
Ceilings, shelves and retail cases.
Rooflines, signs and seasonal color.
Tape works anywhere you want light without a visible fixture: hidden under an edge, inside a channel or behind a cove. Complete the install with controllers and remotes, connectors and adapters and low-voltage transformers. For ready-to-mount kitchen fixtures, see Under Cabinet Lighting.
Quick answers on voltage, IP ratings, cutting, power and holiday use.
Our lighting experts can help you pick tape, drivers and controls.
(800) 865-7221Talk to AQL's lighting experts about runs, drivers and controls. Trusted by contractors since 1974.
Become An AQL Pro Find An Electrician
