| Top-Spec Epistar LEDs | 18 Gauge Heavy Duty Wire | Gold Wire Welding | Precision Capacitors | Standard 8 amp Rectifiers |
ROPE LIGHT MUST BE UNCOILED BEFORE CONNECTING TO POWER
CONNECTING TO POWER WHILE STILL ON SPOOL WILL RESULT IN DAMAGE TO THE PRODUCT AND/OR FIRE,
AND WILL VOID THE WARRANTY ON YOUR PRODUCT.
AQLIGHTING is excited to bring you this newly designed, exclusive Endura rope light. Perfect for the holidays and more, this completely redesigned 150FT epistar LED rope light uses the highest quality components on the market. We spared no expense designing the Endura Rope series to make it the best LED rope light you can buy. Features better and brighter light coverage, more vivid colors, increased durability, and we backed it up with a 5 year indoor warranty or a 3 year outdoor warranty. This warm white LED rope light comes standard with a factory-attached power cord and end cap however, an additional accessory kit is offered to allow you to cut and modify your LED rope light for a variety of desired lengths. This light also features a UV treated tube as well as a thicker 18 gauge copper wire to maximize longevity and durability. With its high-end specifications and construction this new and improved LED rope light will surely impress and and satisfy your lighting needs.
PRECISION CAPACITORS
- Offers Standard capacitors that use 470Ω as well as Precision capacitors that use 620Ω. (Ω= ohms)
- Features an operating ambient temperature range from -55°C to +155°C allowing the resistor to remain stable under all conditions.
- This capacitor is low temperature coefficient.
- Features an excellent high frequency performance.
- Has greater moisture resistance.
- Basically, the PRECISION CAPACITOR will greatly increase the lifetime of the rope.
GOLD WIRE WELDING
- SUPERIOR—electrical conductivity, features thermal conductivity, mechanical properties, curvature, breaking force, corrosion resistance, chemical stability
- The Endura rope light has thousands of connections so gold wire welding is a superior process that dramatically increases the lifespan of the light.
HEAVY GAUGE COPPER WIRE
- This rope light features an 18 gauge copper wire which can be loaded up to 1500 watts beating the standard 20 gauge with a maximum of 880 watts.
- Equates to more stable conductivity for a longer lifespan.
- The durability from a thicker wire reduces manipulation issues when installing.
The Epistar Diode
- This rope light features the new super bright Epistar LED, making it the most impressive rope light you can buy.
- Founded in 1996, the Epistar LAB of Taiwan is firmly established as the world’s leading LED supplier and is continuously exploring new possibilities.
- Made of the worlds most efficient, high-strength red and blue LED's.
- The Epistar diode is so powerful, competitors won't even know who made it.
Accessorize:
Everyone uses rope light differently so we've created 3 accessory kits to better cater to our customers. Every roll of our LED rope light comes out of the box ready to go, but should you require the ability to create multiple smaller runs from your spool, you'll need more than just the basic roll.
*The standard kit comes already installed with your LED rope light spool. The premium and deluxe kits comes as a separate accessory bundle.
Standard Kit
- Includes:
- LED Rope Light 150' Spool
- 1x 2Ft 2 Wire Power Cord (Attached)
- 1x 2 Wire Power Connector (Attached)
- 1x 1/2" End Cap (Attached)
Premium Kit
- Includes:
- LED Rope Light 150' Spool
- 2x 2Ft 2 Wire Power Cord*
- 2x 2 Wire Power Connector*
- 2x 1/2" End Cap*
- 100x Mounting Clips
Deluxe Kit
- Includes:
- LED Rope Light 150' Spool
- 3x 2Ft 2 Wire Power Cord*
- 2x 6Ft 2 Wire Power Cord
- 5x 2 Wire Power Connector*
- 5x 2 Wire Invisible Splice Connectors
- 5x 1/2" End Cap*
- 150x Mounting Clips
How to Cut Rope Light
For information on how to cut 120v rope light, click here for our in-depth guide, or watch the video below.
| Material | UV-Protected Clear Flexible PVC |
| Voltage | 120V AC |
| Diode Type | Epistar Diode |
| Power Draw | 1.12w per foot |
| Light Output | ~130 Lumens per foot |
| Color | Blue |
| Dimming Capacity | 5% - 100% |
| Cut Marks | Every 30" |
| Rectifier Capacity | 8A |
| Max Run | 150ft |
| Dimensions | 1/2" Diameter X 150' |
| Certifications | cETLus Listed for Indoor/Outdoor Use (5006083) |
Specification Sheet DownloadDimensions Diagram
Frequently Asked Questions
Outdoor Commercial Grade Dimmable LED Rope Light, 120V IP65 WaterProof Endura Series
Can this be cut for different lengths?
The Endura Series Rope light can be cut every 30". There is white printing to indicate the spots where it is safe to cut.
What is the diameter of this rope light?
The Endura series rope light has a 1/2" diameter.
Can you use a standard 110V wall dimmer for these lights?
Yes as long there the dimmer is LED compatible and has enough capacity to handle the wattage.
Can end caps and starter cords be purchased separately and at what cost?
Yes, 2' power cords are $8.99, 6' power cords are $11.99 and end caps are $0.95. These pages are not currently up on the Amazon site. It would be best to contact Amazon directly to help with the transaction.
Where were these made at?
This rope light was made in China per AQ Lighting's manufacturing specs.
What is the total length?
The total length of the Endura Pro Series rope light is 150ft.
Do you have to use a special dimmer with this product? Does have any recommended style dimmers to use?
Any dimmer designed for CFL or LED light bulbs are compatible. We recommend the Lutron DVCL or the Legrand Wattstopper RHCL453PTC. The Lutron will be able to dim up to 150 watts of LED lighting and the wattstopper can go up to 450 watts. For more info, please call the AQLighting Group technical department at 800-865-7221.
What is the difference between standard and premium kits??
The standard kit comes with 150' of rope light, 1 factory attached power cord and 1 factory attached end cap. The premium kit includes 150' of rope light, 1 factory attached power cord,1 factory attached end cap, 1 additional 2' power cord, 1 additional end cap and 100 mounting clips. For more in depth information please call the AQ Lighting tech department at 800-865-7221.
Can I hang items from the Endura Rope Light? Ex: Plant Pots, Signs, etc.
No, all rope light should be supported minimally every 15' and should never be used to support other objects.
Is there a way that I can split the Endura Rope into two separate runs?
We do not offer a "Y" splitter however, we do have accessories like "T's", "X's" and even multi connectors.
Can the center-most portion of the Endura Rope Light be submerged in water?
No, Endura rope is IP65 which means that it can handle outdoor weather conditions but it can never be submerged.
Customer Submitted Photos
Indoor Pool Installation
Outdoor Tropical Tree Design
Warm White Kitchen Installation
Patriotic Spiraled Flag
Palm Tree Design
How to Cut Rope Light
How to Install Power Cord
How to Install Compression Connector
How to Install Clear Connector
How to Install End Cap
How to Install Invisible Connector
Rope Light Accessories Guide
Troubleshooting Rope Light Accessories
Troubleshooting Rope Light Power Cord
Troubleshooting Rope Light
Replacing a Section of Rope Light
Tips and Tricks on Mounting Rope Light
Tips on Rope Light Connectors
Illuminate every space with confidence and style
The Reliable Partner For All Your Lighting Needs.
+40 Year Experience
With over 40 years of lighting expertise, we focus in providing the best customer experience and great quality products
Shipping & Quickship
Free Shipping on items over $100 and Quickship for selected items placed by 1pm PST ship same day.
Stress Free & Easy Returns
We provide a 30-day, stress free return and exchange policy on the majority of our products
