Note: All Sales are Final on Clearance Products.
Note: For longer runs, some applications may experience Voltage Drop. Click to learn more.
AQLighting presents an area light kit redesigned to capture the latest in lighting technology with sleek modern miniaturized form. Each fixture brilliantly provides 250 lumens of output per fixture. The frosted diffuser provides exceptional lighting and resolves the issue of bulb glare. Enjoy a beautiful, welcoming entrance to your home with this brass mini top area light kit.
-
No Splice Connection
A system designed by a general contractor to empower homeowners to embrace their savvy ability to light up their own landscape without needing to bring in a professional.
- Low voltage, 12v lighting connected with a plug and twist watertight IP68 rated seal.
- Add additional fixtures without worrying about extra cabling or looping at each fixture.
- Tool free installation saves excessive labor and makes it simple for the average homeowner to personally update their own lighting.
-
Mini Design, Brilliant Output
- Sleek, slim area light design for contemporary landscape design.
- Bronze finish on brass fixture for an exceptional combination of beauty and durability.
- Frosted diffuser for gorgeous ambiance without obnoxious bulb glare.
Warranty
One year limited warranty against defects in construction.
Area Light Specifications
| Material | Brass |
| Voltage | 12V |
| Socket Type | UL Certified JC Bi-Pin (E230758) |
| Bulb Type | JC Bi-Pin Cluster |
| Power Rating | 2.3w/Fixture |
| Mounting | Ground / Surface |
| Fixture Weight | 2.12 lbs |
Specification Sheet Download Dimensions
Frequently Asked Questions
Sleek Mini Area Light Fixture - PAMT-KH1021
This fixture will run on 120 volt but you can not use the NSC wiring system and you have to use a 120 volt JC BI pin bulb instead of a 12 volt bulb.
Voltage drop depends on the length of the run, the total load and the gauge of the wire. If you use a 2.5 watt bulb and 30' jumpers for 7 fixtures you would still be within range. If you decided to use 4 watt bulbs and 30' jumpers, your voltage drop would be too great so you would have to think about either using our 12 gauge NSC jumpers or making multiple runs to lessen the load.
No, this is designed as a mini bollard so we do not offer extensions.
Yes, these are made of brass or copper which will not corrode so if you wanted them to be shorter, just bury them deeper into the ground.
Note: All Sales are Final on Clearance Products.
Note: For longer runs, some applications may experience Voltage Drop. Click to learn more.
AQLighting presents an area light kit redesigned to capture the latest in lighting technology with sleek modern miniaturized form. Each fixture brilliantly provides 250 lumens of output per fixture. The frosted diffuser provides exceptional lighting and resolves the issue of bulb glare. Enjoy a beautiful, welcoming entrance to your home with this brass mini top area light kit.
-
No Splice Connection
A system designed by a general contractor to empower homeowners to embrace their savvy ability to light up their own landscape without needing to bring in a professional.
- Low voltage, 12v lighting connected with a plug and twist watertight IP68 rated seal.
- Add additional fixtures without worrying about extra cabling or looping at each fixture.
- Tool free installation saves excessive labor and makes it simple for the average homeowner to personally update their own lighting.
-
Mini Design, Brilliant Output
- Sleek, slim area light design for contemporary landscape design.
- Bronze finish on brass fixture for an exceptional combination of beauty and durability.
- Frosted diffuser for gorgeous ambiance without obnoxious bulb glare.
Warranty
One year limited warranty against defects in construction.
Area Light Specifications
| Material | Brass |
| Voltage | 12V |
| Socket Type | UL Certified JC Bi-Pin (E230758) |
| Bulb Type | JC Bi-Pin Cluster |
| Power Rating | 2.3w/Fixture |
| Mounting | Ground / Surface |
| Fixture Weight | 2.12 lbs |
Dimensions
Frequently Asked Questions
Sleek Mini Area Light Fixture - PAMT-KH1021
This fixture will run on 120 volt but you can not use the NSC wiring system and you have to use a 120 volt JC BI pin bulb instead of a 12 volt bulb.
Voltage drop depends on the length of the run, the total load and the gauge of the wire. If you use a 2.5 watt bulb and 30' jumpers for 7 fixtures you would still be within range. If you decided to use 4 watt bulbs and 30' jumpers, your voltage drop would be too great so you would have to think about either using our 12 gauge NSC jumpers or making multiple runs to lessen the load.
No, this is designed as a mini bollard so we do not offer extensions.
Yes, these are made of brass or copper which will not corrode so if you wanted them to be shorter, just bury them deeper into the ground.
